Product Brochure

34
Riolito
®
and Riolito
®
Modular Base Assembly with wedi Fundo Click and Seal
Drain
Strainer Key
Compression Spacer with Lubricant
Lubricant
Use with nominal schedule 40 2 in. PVC, ABS
or Cast iron waste pipe. Use special wedi
parts for installation to copper pipe.
Locking Nut
Drain Body
Sealing Gasket with Lubricant
The shower base may be extended using a pre-sloped
wedi extension panel.
wedi shower bases thicker than 1 1/2 inches where an
extension is connected require a wedi building panel be
placed and thin-set mortar adhered under the extension
panel to adjust for a proper connection fit.
A wedi shower base can be cut to size using a circular saw with standard carbide blade. You can remake the 1/2 inch x
1/2 inch perimeter channel by cutting through the cement surface using the circular saw set to cut 1/2 inch deep. You
can use a circular saw or a sharp utility knife to cut the new channel 1/2 inch wide through the blue exposed foam side.
Clean the new channel and the base and remove all saw dust and loose particles.
wedi Fundo
®
shower bases may be cut and/or extended
wedi prefabricated extensions are pre-notched. They can be joined with other extensions in a mitered design joining
two or more sides of a shower to be extended. Make interlocking notch connections on-site as needed for mitered
connections. Consult wedi’s manual for using wedi sloped extensions.