Product Brochure

ManualsBrandswedi ManualsBath24 in. x 24 in. x 34 in. Large Suspended Corner Seat

Approvals & Certificates

Approvals and certificates applicable

to entire Fundo Shower System incl.

wedi Building Panel

City of New York,

MEA 912-52-SM

Fundo Shower Systems

& Building Panels:

ICC PMG 1189

(for USA and Canada)

Meets all applicable

ANSI / ISO Standards

incl. ANSI 118.10 and

IAPMO PS106

TCNA handbook

recognized for wall,

floor, countertop, &

more applications

City of Los Angeles

Approved. Please see

ICC PMG report.

BBA (British Board

of Agrément)

DIN EN ISO 9001 CE marked

Diverse State Approvals

SAI Global Watermark Certified (Australia & New Zealand)

Environmental Consideration

Contains no unbonded fire retardants like HBCD ( Hexabromocyclododecane) which has been banned in Canada and is a toxic substance of high con-

cern with the US EPA.

Highlights

Blue XPS core is 100% waterproof and remains fully functional even after partial damage- specially engineered for 100% consistency of its closed-cell

structure. The particular cell structure design ensures compression strength where it is needed, internal waterproofness and an easy cut experience.

wedi product surfaces include specially designed and manufactured fiberglass mesh, fully embedded in the coating. It won‘t break, and it offers a

structure with texture for perfect tile adhesion. The strong backing properties of the panels start with the mesh surface coating.

wedi’s foam-based products are made with extrusion agents in compliance with the Montreal Protocol, helping to reduce Global Warming Potential

(GWP). The foam-based products are made from 25% recycled content.

wedi does not compromise safety or composition and provides safe fire behavior and protection. wedi uses consistent levels of fully polymeric bonded

flame retardant (PFR) that does not release over time. wedi products meet international standards such as REACH and the UN’s Stockholm Convention

Protocols. The foam is precisely milled and cut to produce tile underlayment s urfaces with absolutely perfect dimensions. All milling waste is recycled.

wedi joint sealants are Polyisocyanates and PVC free and are zero VOC sealants.

Weight for wedi Building Panels Width Length Thickness Weight

48 in. 60 in. 1/4 in. 13.9 lb.

48 in. 60 in. 1/2 in. 14.4 lb.

Properties & Test Methods Value (wedi Building Panel and Fundo Shower System Components)

ASTM C 578 * Standard Specification for Rigid,

Cellular Polystyrene

Compliant

Thermal Conductivity * 75°F (25°C) - ASTM C518 0.23 Bbtu in/hr F

R-Value * 75°F (25°) - ASTM C518 4.3hr ft. 2 F/Btu/in (R Value for 1” wedi = 4.3)

Tensile Strength *** ASTM C297 65 psi

Shear Bond Strength * Under conditions required in ANSI A118.10-1999 4 week Shear Strength Dry: 216 psi

12 week Shear Strength Dry: 217 psi

100 day Shear Strength Wet: 201 psi

Waterproof *** ASTM D4068 / ANSI A118.10-1999 Passed

Waterproofness of Assembly *** ASTM E331

Passed, wedi Fundo Kit assembly (complete system)

Water Vapor Transmission**** ASTM E 96-2016 Permeance / Perms 0.03 and

WVT (grains/h x ft

) 0.05

Capillarity *** 0

Fungus / Bacteria Resistance *** ASTM G21 Passed, No Growth

Flexural Strength * ASTM C947 627 psi

Robinson Floor Test * ASTM C627 Heavy duty commercial use, passed *

Fastener Pull Through * ASTM C473 Wet 131.8 lb./Dry 196.2 lb.

Temperature Limits * -58 / +165° F

Freeze & Thaw * ASTM C666 - 25 Cycles No disintegration/change; Passed

Accelerated Aging * AC 71 - 25 Cycles No disintegration; Passed

Linear Variation *** AC 159/ASTM 1037-39 Passed, less than 0.07%

Surface Burning Characteristics * ASTM E84-16 (NFPA 255, ANSI / UL 723, UBC 8-1)

Tested as required without tile on Building Panel

surface

Flame Spread Index (FSI): 20

Smoke Developed Index (SDI) : 70

Classification: Class A

Floor and Trench Drain Compliance ** ASME A112.18.2 Passed, Compliant (ICC PMG 1189)

Seam Strength* ASTM D751-11 (requirement 8 lb/in width) Passed, 36.4 lbs

* Consult wedi for proper subfloor, tile, setting materials

choice to design heavy duty commercial use floor surfaces.

* wedi Building Panel tested

** wedi Fundo Floor Systems tested

*** Entire wedi shower system tested

**** “Vapor 85 assembly incl. seams”. Test standard is ASTM E 96 Method E at 100 F* and 90 % R.H.

Technical Properties - wedi Systems

Technical Data