Product Brochure

wedi Fundo
®
Ligno Recess Installation Kit
To make preparation for a wedi Fundo
®
Shower Kit - Ligno installation much easier and safer, we offer the wedi Fundo
®
Ligno Recess Installation Kit. This installation kit is designed to help you recess a wood floor between existing floor
joists (2 x 10 joists or engineered joists) without the need to sister these joists with more 2 x 6, or other wood framing
material. It will add structural stability and safety to the recess and allow for a safe installation process. In turn, this will
help save time compared to working with framing material only. Recessing the floor is now possible even where HVAC
equipment or plumbing systems are crowding the space in between joists. The wedi recess bracket support system will
allow a 3/4 inch wood floor to be solidly situated between and flush with joists. The bracket system connects, carries,
and supports the recessed wood along floor joists; along the surrounding subfloor (not recessed) and the sides of the
shower where the wood meets the framing bottom plates. Ensure the general subfloor construction, before installing
the wedi system, meets current IRC requirements for structural construction, meets dead and live load minimum
requirements and a deflection potential of less than L/360. Once the wedi bracket system is installed, and the recessed
floor is in place, all requirements will be met or exceeded. The system comes in one box equipped with two different
profile types, and all the hardware needed. One kit covers recessed spaces for a Fundo Ligno up to 5 foot × 5 foot in
size. Do not use this system for any other recessed shower installations except the wedi Fundo
®
Ligno system.
24
C-BracketJoist Bracket