Product Brochure

8 9
The wedi Subliner Dry
®
system aids in the installation of waterproof transitions between the plumbing and the shower, the
shower base and bathroom oor, in steam or vapor rooms, and in other applications where pliable surface waterproong with
low build up is ideal.
Putting together a wedi shower system
Step 4: Choose installation accessories, continued.
Subliner Dry
®
System
wedi Subliner Dry
®
Sheet Membrane - Used to aid
waterproof and vaporproof transition between floor and
curbless shower or steam room access.
 Average curbless shower installation uses 2 rolls of 16
ft. long wedi Subliner Dry
®
mat
 Packaged in 16 foot long (53 sqft.) or 98 foot long (322
sqft.) rolls (Sheets are 3 foot wide).
wedi Subliner Dry
®
Sealing Tape Inside and Outside
Corners - Used to aid waterproof and vaporproof
transition between shower base and any corners within
36 inches of the shower on the outside of wedi shower
bases in the general bathroom area or in steam shower
applications with wedi Vapor 85.
 Average curbless shower installation may use 2 wedi
Outside Corners
 Average steam shower installation may use 6-8 wedi
Inside Corners and 6-8 wedi Outside Corners.
wedi Sealing Collars - Used to aid waterproof transition
around shower pipe or fixture protrusions.
 Average shower or steam room installation uses one
wedi Flexi Collar per pipe protrusion and one wedi
Mixing Valve Flexi Collar per mixing valve
 Packaged individually
 Due to many design variants of mixing valves used in
bathroom designs, the Mixing Valve Flexi Collar may
have to be modified to fit the installation. This can
be done by cutting its fleece sheet to open up the
diameter of its opening for larger mixing valves. The
collar functions to divert moisture moving through the
thinset layer behind a wall tile. The moisture in a wall
assembly mostly moves downward and any cuts in the
collar around the top half of the mixing valve should be
avoided.
wedi Sealing Tape - Used to waterproof, vaporproof,
and secure transition seams in steam applications. Fleece
laminated.
 Average 3 x 6 foot steam shower with 4 walls, ceiling
and 2 benches uses 3 rolls of wedi sealing tape
 Packaged in a 5 inch wide x 32 foot long roll.
wedi Vapor 85 Fastener Patches - Used to waterproof
and vaporproof fastener points in steam shower
installations.
 Packaged in kits of 100 3 x 3 inch patches
 Applied with wedi Sealant 620 .
wedi Tub Sealing Tape - Used to create a waterproof
back-up to a tub’s traditional surround wall backers when
no tub flange or only partial flanges are built into the tub.
 Average tub installation uses 1 roll of wedi Tub Sealing
Tape
 Packaged in a 5 inch wide x 12 foot long roll with a self
adhesive strip to adhere to a smooth tub surface and is
sealed against framed blocking using wedi Joint Sealant
(serves as a back up for otherwise vulnerable sealed
joints between a backer board and a prefabricated tub
surface when no flanges secure waterproofing).