Installation Guide

Assembly Instructions
wedi Fundo Riolito/Riofino
Installation instructions wedi Fundo Riolito Drain Cover
A
B
C
General Information
A Drain Cover Fundo Riolito
standard: Polished Stain-
less Steel Standard Version
B Drain Cover Fundo Riolito
exclusive: High Grade
Stainless Steel Version
C Drain Cover Fundo Riolito
tileable: Can be tiled with
epoxy glue /adhesive. Can
be used for
1
/4” and
1
/2”
tile / stone (reverse cover)
D Drain cover can be ad-
justed from + 5 mm to
+ 25 mm from Riolito
base surface
•
Where wedi building panel or curb overs / caps are installed over horizontal surfaces (seats,
curbs, tubdeck transitions) do not set any fasteners and do not allow the glass door
installation to penetrate the wedi panel as it is your waterproofing.
•
Make sure that doors are installed tight to contain water inside the shower. Make sure
doors are installed to only load bearing reinforced framing.
•
Where wedi buildig panel is installed over corners of a structure showing an angle other
than 90° please miter the board edges to gain adhesion surface. Utilize a wedi sealing tape
in addition to regular sealing for safety.
Special considerations
during and after
installation
wedi_MA_Fundo_Riolito-Riofino_USA_2014_4C_v3_rz_Layout 1 09.12.14 08:32 Seite 6