Product Brochure

ManualsBrandswedi ManualsFloor Patching, Self-Leveling & WaterproofingSubliner Waterproofing Membrane 39 in. x 98 ft.

Building Board

Shower

Pan End

Joists

5/8” Filler

Plywood

C Bracket

Joist

Bracket

Parallel Entry

Secure wood strips to C and Joist brackets using flat head Phillips

self-drilling screws with wings as provided by wedi. Fasten at minimum

every 10 (ten) inches (254 mm) where joist brackets are present, or

where C brackets are in line along the framed wall and parallel to the

floor joists. Fasten wood into all other C brackets with a minimum of

two (2) screws where singular C Brackets are mounted between floor

joists on wall framing or wood floor transition side.

Install wedi Fundo Ligno in a bed of tile adhesive as per Ligno instal-

lation manual.

Your Ligno shower is now flush with the surrounding subfloor and is

supported by a subfloor with absolute structural integrity, so important

for safe tile installation and without the risk of cracks in tile or grout

so typical to tile substrate installations or shower systems installed with

insufficient support.

When joists are parallel to the shower entry, the transition to recessed floor needs to be placed on the front (the edge of a joist adjacent to the recessed

part) edge of floor joist regardless of placement. Sometimes the recess needs to be extended past the intended shower pan. The space will be

treated the same as any recessed one but filled back in with 5/8” (15,9 mm) thick plywood up to the intended shower pan.

This product is for use with wedi Fundo Ligno Shower System only. The product is tested and warranted exclusively for this use. Please do not use

this product to recess a subfloor and install any other shower or building structure in such recess supported by this product. wedi Ligno Recess

Installation Kit has undergone thorough testing and passed Robinson Test C627 for floor assemblies.

1514

Clean and degrease the bracket

support flanges/surfaces and

apply a 1/4“ (6.35 mm) bead

of wedi Joint Sealant.

Use wedi Joint Sealant or a con-

struction adhesive suitable for

metal and wood application.

Place all wood strips into posi-

tion on brackets.