Use and Care Manual

• Do not force the power tool. Use the correct power
tool for your application. The correct power tool will
do the job better and safer at the rate for which it was
designed.
• Do not use the power tool if the switch does not
turn it on and off. Any power tool that cannot be
controlled with the switch is dangerous and must be
repaired.
• Disconnect the plug from the power source and/
or the battery pack from the power tool before
making any adjustments, changing accessories,
or storing power tools. Such preventive safety
measures reduce the risk of starting the power tool
accidentally.
• Store idle power tools out of the reach of children
and do not allow persons unfamiliar with the
power tool or these instructions to operate the
power tool. Power tools are dangerous in the hands
of untrained users.
• Maintain power tools. Check for misalignment or
binding of moving parts, breakage of parts and
any other condition that may affect the power
tools operation. If damaged, have the power tool
repaired before use.
Many accidents are caused by
poorly maintained power tools.
• Keep cutting tools sharp and clean. Properly
maintained cutting tools with sharp cutting edges are
less likely to bind and are easier to control.
• Use the power tool, accessories and tool bits etc.,
in accordance with these instructions and in the
manner intended for the particular type of power
tool, taking into account the working conditions
and the work to be performed. Use of the power
tool for operations different from those intended could
result in a hazardous situation.
Battery tool use and care
• Recharge only with the charger specifi ed by the
manufacturer. A charger that is suitable for one type
of battery pack may create a risk of ! re when used
with another battery pack.
• Use power tools only with specifi cally designated
battery packs. Use of any other battery packs may
create a risk of injury and ! re.
• When battery pack is not in use, keep it away from
other metal objects, like paper clips, coins, keys,
nails, screws or other small metal objects, that can
make a connection from one terminal to another.
Shorting the battery terminals together may cause
burns or a ! re.
• Under abusive conditions, liquid may be ejected
from the battery; avoid contact. If contact
accidentally occurs, fl ush with water. If liquid
contacts eyes, additionally seek medical help.
Liquid ejected from the battery may cause irritation or
burns.
Service
• Have your power tool serviced by a qualifi ed repair
person using only identical replacement parts.
This will ensure that the safety of the power tool is
maintained.
HEDGE TRIMMER SAFETY WARNINGS
a DANGER: KEEP HANDS AWAY FROM BLADE
• Use both hands when operating the hedge trimmer.
Using one hand could cause loss of control and
result in serious personal injury.
• Keep all parts of the body away from the cutter
blade. Do not remove cut material or hold material
to be cut when blades are moving. Make sure the
switch is off when clearing jammed material. Blades
coast after turn off. A moment of inattention while
operating the hedge trimmer may result in serious
personal injury.
• Carry the hedge trimmer by the handle with the
cutter blade stopped. When transporting or storing
the hedge trimmer always fi t the cutting device
cover. Proper handling of the hedge trimmer will reduce
possible personal injury from the cutter blades.
• Hold the power tool by insulated gripping surfaces
only, because the cutter blade may contact hidden
wiring. Cutter blades contacting a “live” wire may make
exposed metal parts of the power tool “live” and could
give the operator an electric shock.
• Keep cable away from cutting area. During operation
the cable may be hidden in shrubs and can be
accidentally cut by the blade.
SAFETY INSTRUCTIONS FOR OPERATION
• Make sure the product is fully assembled before you
use it.
•
The product can cause objects to eject, which can
cause damage to the eyes. Always use an approved eye
protection when you operate the product.
• Be careful, a child can come near the product without
your knowledge during operation.
• Do not operate the product if there are persons in the
work area. Stop the product if a person goes into the
work area.
• Make sure that you are always in control of the product.
• Do not use the product if you cannot receive aid if an
accident occurs. Always make sure others know when
you use the product before you start operation.
• Do not turn with the product before you make sure that
no persons or animals are in the safety area.
• Remove all unwanted materials from the work area
before you start.
• Do not use the product in bad weather, such as fog,
rain, strong winds, risk of lightning or other conditions.
Dangerous conditions, such as slippery surfaces, can
occur because of bad weather.
• Make sure that you can move freely and work in a stable
position.
• Make sure that you cannot fall when you use the
product. Do not tilt when you operate the product.
• Stop the motor before you move the product.
• Do not put down the product with the motor on.
ADDITIONAL SAFETY INSTRUCTIONS
• Use the product correctly. Injury or death is a possible
result of incorrect use. Only use the product for the tasks
found in this manual. Do not use the product for other
tasks.
• Obey the instructions in this manual. Obey the safety
symbols and the safety instructions. If the operator
does not obey the instructions and the symbols, injury,
damage or death is a possible result.
• Do not discard this manual. Use the instructions to
assemble, to operate and to keep your product in good
condition. Use the instructions for correct installation
of attachments and accessories. Only use approved
attachments and accessories.
• Do not use a damaged product. Obey the maintenance
schedule. Only do the maintenance work that you ! nd
an instruction about in this manual. An approved service
center must do all other maintenance work.
• This manual cannot include all situations that can
occur when you use the product. Be careful and use
your common sense. Do not operate the product or do
maintenance to the product if you are not sure about the
5
Power tool use and care