User`s manual

MW500 | 5
General Information
- English -
2.3 NOMENCLATURE
Table 2.1: Nomenclature of the MW500 drives
Pr o d u c t
and
Series
Identification of the Model
Brake
Degree of
Protection
Conducted
Emission
Level
Disconnecting
Switch
Connection Box
Hardware
Version
Special
Software
Version
Frame
Rated
Current
N° of
Phases
Rated
Voltage
Ex.: MW500 B 06P5 T 4 DB 66 C2 DS A56 --- --
Available options
MW500
See table 2.2.
A56 = motor
connection box
size 56x56mm
Blank = standard
DB = with dynamic braking
Sx = special
software
A70 = motor
connection box
size 70x70mm
Blank = standard plug-in
module
H00 = without plug-in
66 = IP66/Nema4X (degree of protection)
DS = with disconnecting switch
Blank = without disconnecting switch
Blank = It does not meet the standards leves for conducted emission.
C2 = with internal RFI filter
Table 2.2: Available options for each field of the nomenclature according to the rated current and
voltage of the drive
Frame
Rated Output
Current
N° of Phases Rated Voltage
Available Options for the Remaining Identification Codes of the
Drives
Brake
Degree of
Protection
Conducted
Emission Level
Disconnecting
Switch
Connection
Box
A
04P3 = 4.3 A
S = single-phase
power supply
2 = 200...240 V
DB 66 Blank or C2 Blank or DS A56 or A70
06P0 = 6.0 A
02P6 = 2.6 A
T = three-phase
power supply
4 = 380…480 V
04P3 = 4.3 A
B
06P5 = 6.5 A
S = single-phase
power supply
2 = 200...240 V
10P0 =10.0 A