User`s manual

20 | MW500
Keypad (HMIR) and Basic Programming
- English -
4.2 INDICATIONS ON THE HMIR DISPLAY
Inverter status
Secondary indication
Measurement unit
(it refers to the value
of the main indication)
Bar graph
Menu (to select the
parameter groups) –
only one parameter
group is shown
at a time.
Main display
Figure 4.2: Display fields
Parameter groups available in the field Menu:
 PARAM: all parameters.
 READ: reading parameters only.
 MODIF: parameters modified in relation to the default only.
 BASIC: parameters for basic application.
 MOTOR: parameters related to the control of the motor.
 I/O: parameters related to digital and analog inputs and outputs.
 NET: parameters related to the communication networks.
 HMIR: parameters to configure the HMIR.
 SPLC: parameters related to the SoftPLC.
 STARTUP: parameters for oriented Start-up.
Status of the drive:
 LOC: command source or local references.
 REM: command source or remote references.
 : direction of motor rotation by means of arrows.
 CONF: configuration error.
 SUB: undervoltage.
 RUN: execution.