User`s manual

MW500 | 23
Keypad (HMIR) and Basic Programming
- English -
NOTE!
When the drive is in the fault state, the main display indicates the number
of the fault in the format Fxxxx. The browsing is allowed after the activation
of the key ESC, and the indication Fxxxx goes to the secondary display
until the fault is reset.
NOTE!
When the drive is in the alarm state, the main display indicates the number
of the Alarm in the format Axxxx. The browsing is allowed after the
activation of any key, and the indication Axxxx goes to the secondary
display until the situation causing the alarm is solved.
NOTE!
A list of parameters is presented in the quick reference of the parameters.
For further information about each parameter, refer to the programming
manual of the MW500.