Manualshelf

User`s manual

ManualsBrandsWEG ManualsConsumer electronicsMW500
12345678910
Summary of Reviews
The information below describes the reviews made in this manual.
Review Description Chapter
00 First edition -
01 General review and inclusion of frame A -
NOTE!
The inverters MW500 have the default parameters set as described below:
50 Hz for models with internal filter (check the smart code E.g.:
MW50 0B06P5T4).
ATTENTION!
Check the frequency of the power supply.
In case the power supply frequency is different from the default frequency
(check P0403), it is necessary to set:
P0204 = 5 for 60 Hz.
P0204 = 6 for 50 Hz.
It is only necessary to set these parameters once.
Refer to the programming manual of the MW500 for further details about
the setting of parameter P0204.