Operation Manual

5
M6 Washer (32)
M10 Locknut (42)
M10 x 165mm Bolt (50)
M8 x 70mm Bolt (46)
M10 Washer (55)
M8 Locknut (36)
M10 x 90mm Carriage Bolt (43)
M10 x 90mm Bolt (45)
M10 x 85mm Bolt (44)
M6 x 80mm Screw (48)
M6 x 40mm Screw (51)
M10 x 77mm Bolt Set (47)
M4 x 19mm
Screw (54)
M8 Washer (49)
M6 x 20mm
Screw (53)
M5 x 19mm
Screw (52)
PART IDENTIFICATION CHART
Refer to the drawings below to identify small parts used in assembly. The number in parentheses by each draw-
ing is the key number of the part, from the PART LIST near the end of this manual. Note: Some small parts
m
ay have been preattached. If a part is not in the hardware kit, check to see if it has been preattached.