Operation Manual

7
3. Attach the Seat (18) and the Seat Bracket (38)
to the Frame (1) with two M6 x 80mm Screws
(48) and two M6 Washers (32).
3
4. Attach the Front Leg (4) to the Frame (1) with
two M10 x 85mm Bolts (44), two M10 Washers
(55), and an M10 Locknut (42).
See steps 1 and 2. Tighten the M10 Locknuts
(42).
4
1
1
4
42
44
55
18
38
48
48
32
32
5. Apply some of the included grease to an M10 x
165mm Bolt (50). Attach the Backrest Post (15)
to the Backrest Frames (16) with the Bolt, two
M10 Washers (55), and an M10 Locknut (42).
Do not tighten the Locknut yet.
Attach the Backrest (19) to the Backrest
Frames (16) with four M6 x 40mm Screws (51)
and four M6 Washers (32). Do not tighten the
Screws yet.
5
19
50
16
32
32
55
55
15
51
51
42
Grease