Operation Manual

9
9. Attach the Bumper (39) to the Curl Bar (17)
with an M4 x 19mm Screw (54).
A
ttach the Curl Bar (17) to the Leg Lever (5)
with the Pin/Tether (35). Then, attach the Tether
t
o the Leg Lever with an M4 x 19mm Screw
(54).
10. Attach the Curl Pad (20) to the Curl Post (6)
with two M6 x 20mm Screws (53).
9
10
1
7
39
54
5
35
54
20
6
53
11. Identify the Left Upright (11) which is marked
with an “L” sticker. Orient one of the Bases (9)
as shown. Attach the Base to the Left Upright
with two M10 x 90mm Carriage Bolts (43) and
two M10 Locknuts (42).
Attach the other Base (9) to the Right
Upright (10) in the same way.
11
9
9
10
42
42
Warning
Decals
43
11