Datasheet
Datenblatt
CP T SNT 70W 12V 6A
Weidmüller Interface GmbH & Co. KG
Klingenbergstraße 16
D-32758 Detmold
Germany
Fon: +49 5231 14-0
Fax: +49 5231 14-292083
www.weidmueller.com
Technische Daten
Erstellungs-Datum December 17, 2013 10:15:55 AM CET
Katalogstand xx.xx.xxxx / Technische Änderungen vorbehalten 3
Insulation coordination
Class of protection I, with PE connection
Insulation voltage
4 kV (input / output)
Pollution severity 2
Electrical safety (applied standards)
Electrical machine equipment
Acc. to EN60204
For use with electronic equipment Acc. to EN50178 /
VDE0160
Safety extra-low voltage SELV in accordance with
EN60950
Safety transformers for switch-mode
power supplies
in accordance with EN
61558-2-4
Connection data (input)
Conductor cross-section, AWGcmil ,
max. 12
Conductor cross-section, AWGcmil , min.
24
Conductor cross-section, flexible , min. 0.5 mm²
Conductor cross-section, rigid , max. 2.5 mm²
Conductor cross-section, rigid , min. 0.5 mm²
Number of terminals [Input] 3 for L/N/PE
Tightening torque, max. 0.6 Nm
Tightening torque, min.
0.5 Nm
Wire connection cross section, flexible
(input), max. 2.5 mm²
Connection data (output)
Conductor cross-section, AWGcmil ,
max. 12
Conductor cross-section, AWGcmil , min.
18
Conductor cross-section, flexible , max. 2.5 mm²
Conductor cross-section, flexible , min. 1 mm²
Conductor cross-section, rigid , max. 2.5 mm²
Conductor cross-section, rigid , min. 1 mm²
Number of terminals [Output] 2 (+ / -)
Tightening torque, max.
0.6 Nm
Tightening torque, min. 0.5 Nm
Connection data (signal)
Number of terminals [Signal]
3
Wire connection method [Signal] Pluggable screw
connection
Wire cross-section, AWGcmil [Signal],
max. 12
Wire cross-section, AWGcmil [Signal],
min. 32
Wire cross-section, solid [Signal], max. 2.5 mm²
Wire cross-section, solid [Signal], min. 0.2 mm²
Signalling
Active output signal 11 V DC ± 1 V DC / max.
20 mA
Power Good Signal
Trigger point 9…11 V DC