Data Sheet
Datenblatt
Industrial Ethernet
IE-C6FP8LD0012M40V40-D
Weidmüller Interface GmbH & Co. KG
Klingenbergstraße 16
D-32758 Detmold
Germany
Fon: +49 5231 14-0
Fax: +49 5231 14-292083
www.weidmueller.com
Technische Daten
Erstellungs-Datum December 20, 2013 7:52:44 AM CET
Katalogstand xx.xx.xxxx / Technische Änderungen vorbehalten 2
Dimensions and weights
Length 1.2 m
Net weight 63 g
Temperatures
Operating temperature -20 °C...+60 °C
Storage temperature
-20 °C...+60 °C
Installation temperature 0 °C...+50 °C
Downloads
Attestation of conformity ISO/IEC EN
& TIA/EIA Screened Class EA Category
6A, 2 connector channel ac107535.pdf
Canadian UL approval
DUZX7.E349758.pdf
UL Approval DUZX.E349758.pdf
Electrical properties
Current-carrying capacity at 50 °C 1 A
Dielectric strength, contact contact ≥ 1000 V DC
Dielectric strength, contact shield
≥ 1500 V DC
PoE PoE+ conforming to IEEE
802.3at
Standards
Application-specific communication
cable facilities
ANSI / TIA / EIA-568-
B.2-10, ISO / IEC
11801:2002,
EN50173-1:2007
Connector standard
IEC 60603-7-51
Cable structure
Copper diameter 0.43 mm
Strands 7
Cross-section 4*2*AWG 27/7 - 4*2*0.1
mm²
Insulation
PE
Insulation cross-section 1.04 mm
No. of wires 8
Arrangement of wire cores
Twisted pair
Colour sequence or wires - wire pairs white/blue - blue, white/
orange - orange, white/
green - green, white/
brown - brown
Shielding
S/FTP
Complete shielding Shielding braid made from
copper wiring
Overlap of shielding braid 60 %
Material sheath LSZH
Sheath diameter, min. 5.5 mm
Sheath diameter, max. 5.9 mm
Electrical properties of cable
Category Cat.6
A
/ Class E
A
(ISO/IEC
11801 2010)
Test voltage: wire-wire-shield, at RMS
50Hz, 1 min.
750 V
Characteristic impedance 100 ± 15 Ω at 1–100
MHz
Deviation
25 ns/100m
Resistance differential 5 %
Capacity at 1 kHz 46 nF/km
Mechanical and material properties of cable
Min. bending radius, once only 25 mm
Min. bending radius, repetitive 50 mm
Resistance to spread of flame in accordance with IEC
60332-1 / UL 1581 FT2
Halogen halogen-free, according to
IEC 60754-2