Instructions

Detailed descriptions of I/O modules | Digital counter module UR20-2CNT-100
150 1432790000/03/02.2014Manual u-remote
Overview of the editable parameter UR20-2CNT-100
Channel Description Options(Value) Default value
Diagnostic alarm disabled (0) / enabled (1) disabled
0 ... 1 Filter time signal A 0,01 ms [100kHz] (0) / 0,017 ms [50kHz] (1) / 0,033 ms [30kHz] (2) / 0,1 ms
[10kHz] (3) / 0,2 ms [5kHz] (4) / 0,5 ms [2kHz] (5) / 1 ms [1kHz] (6)
0,01 ms
0 ... 1 Filter time signal B 0,01 ms [100kHz] (0) / 0,017 ms [50kHz] (1) / 0,033 ms [30kHz] (2) / 0,1 ms
[10kHz] (3) / 0,2 ms [5kHz] (4) / 0,5 ms [2kHz] (5) / 1 ms [1kHz] (6)
0,01 ms
0 ... 1 Process alarm overow disabled (0) / enabled (1) disabled
0 ... 1 Process alarm underow disabled (0) / enabled (1) disabled
0 ... 1 Process alarm comp. value disabled (0) / enabled (1) disabled
0 ... 1 Process alarm end value disabled (0) / enabled (1) disabled
0 ... 1 Counting mode count endless (0) / once - forward (1) / once - backwards (2) /
once - no main direction (3) / periodic - forward (4) /
periodic - backwards (5) / periodic - no main direction (6)
count endless
0 ... 1 Comparison function disabled (0) / higher equal comparison value (1) / lower equal comparison value (2)/
equal comparison value (3)
disabled
0 ... 1 Counter dir. signal B inv. disabled (0) / enabled (1) disabled
0 ... 1 Signal mode Rotary transducer - single (0) / Rotary transducer - double (1) / Rotary transducer -
quadruple (2) / Pulse and Direction (3) / disabled (4)
disabled
0 ... 1 Counter behaviour internal gate Interrupt counting (0) / Cancel counting (1) Interrupt counting
0 ... 1 Set value -2147483648 ... 2147483647 0
0 ... 1 End value -2147483648 ... 2147483647 2147483647
0 ... 1 Load value -2147483648 ... 2147483647 0
0 ... 1 Hysteresis 0 ... 255 0