Instructions
Quick view of detailed values
▶ Move the cursor slowly over the station without clicking.
The detailed values of the channel on top of which the cursor
is presently situated are displayed.
Display of channel values
10.6 Displayingandeditingthecouplerstatus
These functions are only accessible when
Force mode is not activated.
The status data can be displayed at all time,
regardless of the state of the eld bus connec-
tion. Setup changes can only be stored while
the eld bus is not active.
▶ Click on the coupler.
The Coupler Status dialogue box opens.
CouplerStatusdialoguebox
Here you can:
– Reset the coupler to factory default settings
– Change the registration data and set up password protec-
tion to limit access to the web server
– Reset any changes that have been made
– Access the coupler parameters
– Access the coupler's datasheet (link to product designa-
tion)
Resettingthewebserver
You can undo all the changes that have been made since the
last time that the web server was started.
After a reset, the coupler is restarted! All data
which is not protected against power failure is
reset.
▶ Click on the coupler.
▶ Click on Reset In the coupler status dialogue box.
Web server | Displaying and editing the coupler status
265Manual u-remote1432790000/03/02.2014