Instructions

11 Replacingcomponents
11.1 Removingtheconnectorframe
WARNING
Explosion risk!
▶ Prior to starting work, make sure that
there is not a potentially explosive atmos-
phere!
WARNING
Dangerous contact voltage!
▶ All work on the u-remote station must be
carried out with the power supply discon-
nected.
▶ Make sure that the place of installation
(switch cabinet etc.) has been discon-
nected from the power supply!
ATTENTION
The product can be destroyed by elec-
trostatic discharge!
The components in the u-remote series can
be destroyed by electrostatic discharge.
▶ Please make sure that personnel and work
equipment are adequately earthed!
▶ Unlock the connector frame.
Unlockingtheconnectorframe
▶ Swivel the connector frame with the cabling towards the
front by 90°.
The connector frame can only be removed in
this 90° position!
▶ Remove the connector frame by pulling it out in a
straight, downward motion.
2.
1.
Openingandpullingouttheconnectorframe
Replacingcomponents | Removing the connector frame
273Manual u-remote1432790000/03/02.2014