Overview of Primary Product
Part Number 550-141-186/0914
s)NSTALLATIONs3TART5Ps-AINTENANCEs0ARTS
Boiler
Model
Number
Draft Hood
Boiler
Model
Number
Draft Hoods
(from boiler left side –front view)
LGB-4 4 LGB-13 BB
LGB-5 5 LGB-14 CB
LGB-6 A LGB-15 CC
LGB-7 B LGB-16 DC
LGB-8 C LGB-17 DD
LGB-9 D LGB-18 ED
LGB-10 E LGB-19 EE
LGB-11 F LGB-20 FE
LGB-12 G LGB-21 FF
LGB-22 GF
LGB-23 GG
<
Refer to the table below for proper hood arrangement. Assemble as shown in Figure 21.
4
Jacket
5
Draft hood
Do not alter draft hood or place any obstruction in breeching or vent system.
Flue gas spillage and carbon monoxide emissions will occur causing severe
personal injury or death.
#
Refer to separate LGB Jacket erecting instructions packed in Jacket Carton. Boiler must be
hydrostatically pressure-tested, plugs for unused tappings installed, and collector hood(s) and
cleanout plates in position before attaching jacket.
The boiler contains ceramic fiber and fiberglass materials. Use care when
handling these materials per instructions on page 28 of this manual. Failure
to comply could result in severe personal injury.
+*
Draft hood
attachment