INSTRUCTION MANUAL CONVECTOR HEATER Thank you for choosing WELL. Please read carefully the following instructions and keep them within reach.
TECHNICAL CHARACTERISTICS Models covered by this instruction sheet： STAND Convector heater with thermostat. RATED POWER INPUT: 2000W MOTER POWER: 20W RATED VOLTAGE RANGE: AC220-240V 50Hz IMPORTANT Read these instructions fully before using the heater. Retain these instructions for future reference. ASSEMBLY OF THE HEATER Before using the heater，the feet（supplied separately in the cartoon)， must be fitted to the unit.
OPERATION OF THE HEATER Note：It is normal when the heaters are turned on for the first time or when they are turned on after having been used for a long period of time the heaters may emit some smell and fumes.This willdisappear when the heater has been on a short while. Choose a suitable location for the heater，taking into account the safety instructions above. Insert the plug of the heater into a suitable socket. Turn the thermostat knob fully in a clockwise directions to the maximum setting.
