User manual

Overview
3
3 Overview
The Kramer TOOLS VP-200N-5, VP-300N-5 and VP-400N-5 are 1:2, 1:3 and 1:4
(respectively) distribution amplifiers for UXGA and higher resolution signals.
The VP-200N-5,
VP-300N-5 and VP-400N-5 accept one input, provide correct
buffering and isolation, and then distribute the signal to two, three or four
(respectively) identical outputs on high-density 15-pin HD connectors.
In particular, the High Resolution UXGA DA:
 Has a high video bandwidth exceeding 400MHz, ensuring that it remains
transparent even at high-resolution graphics modes such as UXGA
(1600x1200)
 Includes an ID Bit control switch as well as vertical and horizontal sync
switches
 Is 5V DC fed
Achieving the best performance means:
 Connecting only good quality connection cables, thus avoiding
interference, deterioration in signal quality due to poor matching, and
elevated noise levels (often associated with low quality cables)
 Avoiding interference from neighboring electrical appliances and
positioning your VP-200N-5,
VP-300N-5 and VP-400N-5 away from
moisture, excessive sunlight and dust
Caution – No operator-serviceable parts inside unit.
Warning – Use only the Kramer Electronics input power
wall adapter that is provided with this unit
1
.
Warning – Disconnect power and unplug unit from wall
before installing or removing device or servicing unit.
4 Your High Resolution XGA DA
This section defines the:
 VP-200N-5 1:2 High Resolution UXGA DA (see section 4.1)
 VP-300N-5 1:3 High Resolution UXGA DA (see section 4.2)
 VP-
400N-5 1:4 High Resolution UXGA DA (see section 4.3)
1 For example, part number 2535-052002