Specifications

WELL mPBX-U110R Administrator's Guide
Page105
6.7.8 Paging Groups
Paging is used to make an announcement over the speakerphone to a phone or
group of phones. Targeted phones will not ring, but instead answer immediately
into speakerphone mode. Please note that this section is for configuring paging
groups. If you would like to configure Intercom settings, please open the Other
Settings -> Feature Codes screen.
This feature is supported by the following SIP phones:
Yealink's T28, T26,T22,T20,T10T,T9CM. Other SIP devices may also work with
this feature but are not officially supported.
Note: A paging group can have a maximum of 20 members.
Figure 6-64
There are two types of paging groups in WELL mPBX-U110R
1. Internal paging Group
In this mode, if you dial its number, mPBX will help to pick up those chosen
members and you can talk directly without any rings.
Figure 6-65
·Paging Group Number
Define the numbered extension that may be dialed to reach this group.