Specifications

WELL mPBX-U110R Administrator's Guide
Page14
Figure 5-1
·DHCP
If this option is set, mPBX will use DHCP to get an available IP address from
your local network. Not recommended or you cannot access mPBX without
the right IP address
·Enable SSH
This is the advance way to access the device, you can use the putty software
to access the device.In the SSH access, you can do more advance setting
and debug. Disabled by default.
· Port: the default is 8022, you change it to another one
·Hostname
Set the host name for mPBX.
·IP Address
Set the IP Address for mPBX.
Recommend to configure a static IP address for mPBX
·Subnet Mask
Set the subnet mask for mPBX.
·Gateway
Set the gateway for mPBX.
·Primary DNS
Set the primary DNS for mPBX.
·Secondary DNS
Set the secondary DNS for mPBX.