Specifications

WELL mPBX-U110R Administrator's Guide
Page15
·IP Address2
Set the second IP Address for mPBX.
·Subnet Mask2
Set the second subnet mask for mPBX.
5.1.2 WAN Settings
Figure 5-2
It support three connection types: DHCP (obtain an IP automatically), PPPoE,
Static IP Address.
Note:
1. WAN port is disabled by default
2. WAN port cannot be used as a router to route the internet packages from
WAN port to LAN port.
·DHCP
.If your ISP says that you are connecting through DHCP or a dynamic IP address
from your ISP, perform these steps:
Step1: Select DHCP as the WAN Connection Type.
Step2: Click Save button to save the settings.
Step3: Reboot the device.
Step4: Check the WAN’s Status (Status Network status).
·Static IP Address
If your ISP says that you are connecting through a static or fixed IP address
from your ISP, perform these steps:
Step1: Select Static IP Address as the WAN Connection Type.