Specifications

WELL mPBX-U110R Administrator's Guide
Page67
·The prefix of speed dial
The prefix should be dialed before the speed dial number. Default is *99
Figure 6-27
2) Add new speed dial.
·Source Number
The speed dial number.
·Destination Number
The number you want to call.
e.g. The source number is ”123”. The destination number is 5503305.The prefix
number is *99.You can use an extension with any type to dial *99123, then it
will call to number 5503305.
Note: Don’t forget to add the outbound dial prefix if you would like to dial the
speed dial number through trunk.
6.4 Inbound Call Control
In this page, we can configure the details of IVR, ring group, queue and inbound
routes.
6.4.1 IVR
When there’s an inbound call aims at Auto Attendant, mPBX will play an IVR
recording and route the caller to the requested destination (for example,
‘Welcome to XX company, for sales press 1, for technical support press 2, for
operator press 0, etc’). The system will transfer the call to corresponding
extension according to DTMF digits inputted by the user
Figure 6-28
There is a default IVR here, we can edit it directly or add IVR by yourself