Specifications

WELL mPBX-U110R Administrator's Guide
Page8
2. System setup
2.1 Connection Drawing
Figure 2-1
2.2 Connecting Ethernet Line
mPBX provides two 10/100MEthernet ports with RJ45 interface and LED
indicator. Plug Ethernet line into mPBX’s Ethernet port, and then connect the
other end of the Ethernet line with a hub, switch, router, LAN or WAN. Once
connected, check the status of the LED indicator. A yellow LED indicates the port
is in the connection process, and a green LED indicates the port is properly
connected.
2.3 Supplying Power
Please follow the steps below to connect the mPBX unit to a power outlet:
1. Connect the small end of the power cable to the power input port on the
mPBX back panel, and plug the other end of the cable into a 100V~240V
AC power outlet.
2. Check the Power LED on the front panel. A solid green LED indicates that
power is being supplied correctly.