Specifications

WELL mPBX-U110R Administrator's Guide
Page87
the incoming call could be forwarded to an extension’s voicemail directly. (# is
default setting).
For example, extension 500 want to leave a message for extension 501, users
can use 500 dial’#501’ to enter the voicemail of 501.
·Voicemail main menu
Users can go to the main menu by dialing *02 (*02 is default setting).
·Attended Transfer
Users may transfer an incoming call by dialing *3 on their phone (*3 is default
setting).
·Attended Transfer Timeout
The time out of transferring a call
·Blind Transfer
Users may blind transfer an incoming call by dialing*03 on their phone (*03 is
default setting).
·Call Pickup
Users may pick up an incoming call by dialing *4 on their phone (*4 is default
setting)
·Extension Pickup
Users may pick up a specific extension’s incoming call by dialing *04+extension
number on their phone (*04 is default setting)
·Intercom
Define the feature code that is used to dial an extension in intercom mode. For
instance setting this value to *5 would allow you to initiate an intercom call with
extension 501 by dialing *5501.
·Normal Spy
In this mode, you can only listen to the extension being spied, for example you
can dial *90501 to monitor extension 501
·Whisper Spy
In this mode you can listen/whisper to the extension being spied, for example,
dialing *91501 to listen to extension 501, you can also talk with 501 too.
·Barge Spy
In this mode, you can barge in both extensions involved the call, for example
dialing *92501 to barge in and talk with all the extensions inside