Datasheet
www.weller-tools.com
weller-tools.com
Weller
®
is a registered trademark of Apex Brands, Inc. © 2022 | Specifications subject to change without notice.
www.weller-tools.com/wxsmart
The Weller WCTH Storage Unit keeps Weller Cartridge Tips easily accessible, tips stored safely, and the workbench organized.
The tip holder is compatible for all Weller Active RT Tips (Cartridge Tips).
KEY FEATURES
> FULL VISIBLE
All soldering tips are placed upright and therefore fully
visible with tip styles and sizes.
> CLEARED UP
Your workbench is clean and organized with the
WCTH storage device. Up to 16 active Weller RT soldering
tips can be handled.
> SAFELY STORED
Place your preferred tips and your hot soldering tips
always in the same order to handle your jobs safely and
correctly.
> COMPATIBLE
All Weller active RT Tip Series can be stored.
> ESD SAFE
The WCTH tip holder is fully ESD safe
> DIMENSION
L x W x H 9,0 x 6,5 x 4,8 cm
WCTH
TIP HOLDER
KEEPS YOUR
WORKBENCH CLEAN
ORDER NO: T0053450299
www.weller-tools.com
weller-tools.com
Weller
®
is a registered trademark of Apex Brands, Inc. © 2022 | Specifications subject to change without notice.
www.weller-tools.com/wxsmart
The Weller WCTH Storage Unit keeps Weller Cartridge Tips easily accessible, tips stored safely, and the workbench organized.
The tip holder is compatible for all Weller Active RT Tips (Cartridge Tips).
KEY FEATURES
> FULL VISIBLE
All soldering tips are placed upright and therefore fully
visible with tip styles and sizes.
> CLEARED UP
Your workbench is clean and organized with the
WCTH storage device. Up to 16 active Weller RT soldering
tips can be handled.
> SAFELY STORED
Place your preferred tips and your hot soldering tips
always in the same order to handle your jobs safely and
correctly.
> COMPATIBLE
All Weller active RT Tip Series can be stored.
> ESD SAFE
The WCTH tip holder is fully ESD safe
> DIMENSION
L x W x H 9,0 x 6,5 x 4,8 cm
WCTH
TIP HOLDER
KEEPS YOUR
WORKBENCH CLEAN
ORDER NO: T0053450299
www.weller-tools.com
weller-tools.com
Weller
®
is a registered trademark of Apex Brands, Inc. © 2022 | Specifications subject to change without notice.
KEY FEATURES
Weller’s WCU is a compact stand-alone high-precision temperature measurement device for quick and accurate temperature
measurement. The WCU unit is strategically designed for users that need to measure fast and easy, while maintaining the
highest level of accuracy. It comes with a large, non-backlite display.
WCU
HIGH-PRECISION TEMPERATURE
MEASUREMENT DEVICE
ORDER NO: T0053450199
> HIGH-PRECISION TEMPERATURE MEASUREMENT DEVICE
Quick and accurate temperature measurements
> INTUITIVE NAVIGATIION
Digital display for fast temperature unit change between °C and °F,
and other functionalities. Values are easily readable from the large
non-backlite display.
> FAST AND EASY MEASUREMENT
Effortlessly auto-calibrate in less than 10 seconds, ensuring the
operator can focus on the important soldering task with a precise
temperature for best productivity.
The Auto-Calibration function can be used with:
WX 1, WX 2, WXD 2, WXA 2, WXR 3, WXsmart
NOTE: For the Auto-Calibration function a RS 232 cable
(order number: T0058764710) needs to be purchased separately
> HIGH-MOBILITY
The compact designed, battery-powered Weller High Precision
Temperature Measurement Device can easily be shared between
different workstations
> SIMULTANEOUS USE OF THERMOCROSS AND THERMOCOUPLE
Keep track of soldering tip and soldering bath temperatures
simultaneously
(Weller Thermocouple Type K Ø 0,1 mm T0058755782)
(Weller Thermocouple Type K Ø 0,5 mm T0053119099)
> TEMPERATURE MEASUREMENT COUNT FUNCTION
Number of tip temperature measurement will be automatically
counted. This function can be useful for control of changing sensor.
> MAX HOLD FUNCTION
The WCU display will show/hold the maximum temperature
measured.
TECHNICAL DATA WCU
Temperature measuring range Thermocross
0°C – 400°C 32°F – 752°F
Temperature measuring range Type-K/Thermocouple
150°C – +1200°C 302 °F – +2192 °F
Applicable sensor
K (CA) type thermocouple
Measuring tolerance
±3 °C (between 300 and 600 °C) ±6 °F (between 572 and 1112 °F)
Energy supply
9 V Dry battery Alkaline cell recommended.
Recommended battery Ansmann XPower alkaline battery 9V E-block
Dimensions
L x W x H 138 x 73 x 43 mm
Weight
120 g (Without battery)
Ambient temperature
0 °C – 40 °C
Air humidity range
max. 80% Relative air humidity, without condensation
Ambient conditions
Applicable pollution degree 2 (According to IEC/ UL61010-1)
> LOW ENERGY CONSUMPTION
Auto Turn-off Timer saves battery life shutting down the unit’s power
after 10 mins without use.
Different grounding possibilities, ex works = hard grounding
> WCU REPLACEMENT SENSOR
0 pcs. T0058771712
> ESD Safe
The Weller WCU Temperature Measurement Device is fully ESD safe
www.weller-tools.com/wxsmart
El set Premium está compuesto por una esterilla de soldadura antiestática ESD, una pulsera ESD y un cable en espiral de
2.4 m. La esterilla de soldadura es resistente al calor y al estaño para soldar, tiene una superficie antirreflejante, dos botones
pulsadores de 10 mm y esquinas redondeadas. La pulsera ESD resulta muy cómoda de llevar incluso durante un largo
periodo de tiempo, es lavable, antibacteriana y posee una alta conductividad gracias al tratamiento textil de plata y carbono,
garantizando la desviación de las cargas eléctricas y el procesamiento correcto de componentes electrónicos delicados. El
cable en espiral tiene una longitud de 2.4 m.
SET DE ESTERILLA DE SOLDADURA
DE SOBREMESA ANTIESTÁTICA
ESD PREMIUM CON PULSERA Y
CABLE EN ESPIRAL
Más información: www.weller-tools.com
AMPLIA SUPERFICIE DE TRABAJO
600 mm x 900 mm
JUEGO COMPUESTO POR UNA ESTERA DE SOL-
DADURA Y UNA CORREA DE PUESTA A TIERRA
(PULSERA + CABLE BOBINADO DE 2.4 M)
APTA PARA DIESTROS
Y ZURDOS
Incl. dos conectores de botón
a presión de 10 mm
DURADERO
Permanentemente elástico,
resistente a la abrasión y cómodo
PROTECCIÓN OCULAR
La superfi cie antirrefl ectante
le facilita el trabajo
RESISTENCIA DE PURGA
10
6
– 10
8
ohmios
RESISTENTE
Resistencia al calor, a las soldaduras,
a los productos químicos y a los aceites
TESTEADO
Conforme con la directiva RoHS
ESD
Estera de mesa de doble capa
(disipadora / conductora)
Número de pedido: T0051403799
> SET COMPUESTO POR ESTERILLA DE
SOLDADURA Y PULSERA ANTIESTÁTICA
(PULSERA + CABLE EN ESPIRAL DE 2.4M)
> DIMENSIONES: 600MM X 900MM
> RESISTENTE A PRODUCTOS QUÍMICOS Y AL
ACEITE
> ELASTICIDAD DURADERA, RESISTENCIA A LA
ABRASIÓN Y COMODIDAD
> CONFORMIDAD ROHS > SUPERFICIE ANTIRREFLEJANTE QUE FACILITA
EL TRABAJO
> ESTERILLA DE SOBREMESA ESD DE DOBLE
CAPA (DISIPADOR / CONDUCTOR)
> RESISTENCIA DE POLARIZACIÓN TÍPICA DE
10
6
- 10
8
OHMIOS
> RESISTENTE AL CALOR Y AL ESTAÑO PARA
SOLDAR
> INCL. DOS CONEXIONES DE BOTÓN PULSADOR
DE 10MM
SET DE ESTERILLA DE SOLDADURA
DE SOBREMESA ANTIESTÁTICA
ESD PREMIUM CON PULSERA Y
CABLE EN ESPIRAL
Más información: www.weller-tools.com
AMPLIA SUPERFICIE DE TRABAJO
600 mm x 900 mm
JUEGO COMPUESTO POR UNA ESTERA DE SOL-
DADURA Y UNA CORREA DE PUESTA A TIERRA
(PULSERA + CABLE BOBINADO DE 2.4 M)
APTA PARA DIESTROS
Y ZURDOS
Incl. dos conectores de botón
a presión de 10 mm
DURADERO
Permanentemente elástico,
resistente a la abrasión y cómodo
PROTECCIÓN OCULAR
La superfi cie antirrefl ectante
le facilita el trabajo
RESISTENCIA DE PURGA
10
6
– 10
8
ohmios
RESISTENTE
Resistencia al calor, a las soldaduras,
a los productos químicos y a los aceites
TESTEADO
Conforme con la directiva RoHS
ESD
Estera de mesa de doble capa
(disipadora / conductora)
Número de pedido: T0051403799
SET DE ESTERILLA
DE SOLDADURA
DE SOBREMESA
ANTIESTÁTICA ESD
PREMIUM CON PULSERA
Y CABLE EN ESPIRAL