User Manual

要求
尺寸：100*140mm
材料：128g双铜纸
工艺：折页，10面，彩色印刷
封面logo尺寸：36*9.3mm或30*7.7mm
Smart Body Fat Scale
S300
User Manual
Caution Troubleshooting Download App and install the batteries
View Reports and Data Maintenance FAQ FCC WARNING
A Better Life Is Worth Living
Add/Delete Users & Basic Settings
Pairing the scale with your smartphone
Product Specification
Accuracy Range
When using digital scale, certain basic safety precautions
must be followed, including the following:
1. The Bluetooth scale should not be used to diagnose or
treat any medical condition. You should consult a doctor
when undertaking any diet or exercise program.
2. lf you are pregnant or have a pacemaker or other internal
device,you should not rely on the data provided by this
product. All data is for reference and is not a substitute for a
dvise from a licensed health care professional.
3. lf the scale malfunctions, first check the batteries and
replace if needed.
4. Check the device before each use. Do not use the device
if damaged. The continuous use of a damaged unit may
cause injury or improper results.
Note:
1. Scale is a high-precision measuring device. Never jump or
stamp on the scale or disassemble. Please handle the scale
carefully to avoid breakage.
2. Place the scale on a hard, flat surface during use. Using the
scale on a soft surface like carpet or linoleum may affect the
accuracy of the scale readings.
3. To ensure weighing accuracy, please gently step on the
scale to wake it up and wait at least 10 seconds before
weighing yourself on the scale. You must also wake up the
scale if it has been moved. Take your easurements at the
same time each day to ensure the most accurate results.
Recalibrating the scale
If the scale has been moved or flipped up side down, it must
be recalibrated to ensure accurate results.
1.Place the scale on a hard, flat surface.
2.Step on the scale with one foot until the digits appear on
the display, then, step off.
3.The scale will show “0.00”, indicating that the calibration
process is complete.
This device complies with part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) this device may not
cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause
undesired operation.
Any changes or modifications not expressly approved by the
party responsible for compliance could void the user's authority
to operate the equipment.
NOTE: This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to Part 15 of
the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate
radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful
interference to radio communications. However, there is no
guarantee that interference will not occur in a particular
installation.
If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure
requirement. The device can be used in portable exposure
condition without restriction.
1.Why doesn't the scale work? Why does the data on
screen disappear in a flash?
- Please check the batteries are installed properly, replace
batteries if necessary.
2. The scale cannot connect with App.
- Check that the phone's software is iOS 8.0 or higher or
Android6.0 or higher.
- Download and open the newest version of the Fitdays App.
- Enable Bluetooth on your phone. For Android 6.0 or
higher, location needs to be enabled
3.No body fat measured when weighing.
- Step on with dry and bare feet
- Ensure Bluetooth is enabled and working
- Ensure personal data is entered.
4. When not in use, please remove the batteries and place the
device in a dry room and protect it against extreme moisture,
heat, lint, dust and direct sunlight. Never place any heavy
objects on the equipment.
5. Before using the scale, make sure you have entered all your
personal data through the Fitdays app.
6. Use the scale while barefoot. The scale cannot measure
body fat percentage if you're wearing shoes or socks.
7. Make sure your feet are dry before weighing yourself.
8. This scale is not waterproof; never immerse the scale in
water. To clean the surface, use a damp cloth or glass cleaner.
Do not use soap or other chemicals.
For body weight: Place the scale on an even surface and wait
at least 10seconds before stepping on the scale. The reading
should display 0.0 kg before stepping on.
Turn on Bluetooth on your smartphone. Location also needs
to be turned on for Android 6.0 or higher.
For body fat and other body composition analysis: Stand
straight on scale and uniformly touched the electrodes with
bare and dry feet as shown below.
Conductive areas
The Bluetooth Scale can connect with your mobile phone
(Android 6.0+ & IOS 8.0+) or iPad via Bluetooth 4.0.
Download the 'Aidot' app free from the App Store or
Google Play.
Functioning normally Change battery
Change battery Overload
Calibrating
Download 'Aidot' via App Store
or Google Play.
Install the original battery
set. Please note the batteries
offered are trial version.
We recommend replacing
them within 3 months and
removing the batteries when
not using for a long time.
Register your own ID,
then add personal data
and confirm OK.
Select [BLE Body Fat Scale]
Click [+]
Click [Add Device]