Data Sheet

www.acptechnologies.com Specifications on this catalog are for reference only, as they are subject to change without notice.
16
CA6 HOW TO ORDER
EXAMPLE: CA6XV2,5-10KA2020 SNP PI WT-6030-BA
4 - Packaging
T&R (Tape and 13” reel) (N.A.)
(2)
T&R
T&R (Tape and 15” reel) (N.A.)
(2)
T&R15
Bulk (blank)
...
(1)
(blank)
...
(1)
(1) If blank, bulk packaging is implied. (2) N.A., Not Applicable: Tape and Reel packaging is only available for SMD terminals.
Trough-hole SMD models
5 - Resistance value
100 200 220 250 470 500 1K 2K
100Ω 200Ω 220Ω 250Ω 470Ω 500Ω 1KΩ 2KΩ 500KΩ 1MΩ 2MΩ 2M2Ω 4M7Ω 5MΩ...
500K 1M 2M 2M2 4M7 5M
- Special tapers have codes assigned:
6 - Resistance law / taper
B
Lin - Linear A
Log - Logarithmic
CAntilog - Antilogarithmic
CODE YXXXXX
2 - Rotors
D M N X
8 - Operating Life (Cycles)
Long life: LV + the number of cycles. ex: LV06 for 6.000 cycles.
(others on request)
Standard (1.000 cycles) (leave blank)
LVXX: ex: LV06
10 - Terminals
SNAP IN P
Shorter tip of terminal, TPXX, where XX is tip length
(under request)
SNP
TPXX, ex: TP20
Standard configuration:
Dimensions:
Protection:
Substrate:
Color:
Packaging:
Wiper position:
Terminals:
Marking:
CA6 Through-hole CA6 SMD
6mm
IP 54 (dust-proof)
On request: Self-extinguishable, to meet UL 94 V-0
Carbon technology Carbon technology, special for high temperature
Blue housing + white rotor Brown housing + grey rotor
at 50% ±15º
Snap in P (except model CA6VS5)
Resistive value marked on housing. Others on request.
Customized products: A drawing is requested when ordering a customized product. Series, rotor, model and total resistive value are indicated before the code that includes
all special specifications. Example: CA6XH2,5-10K CODE C00120.
9 - Cut Track – Open circuit.
Open circuit at end of track, fully CW
Open circuit at beginning of track, fully CCW PCI
PCF
(1) black is not an option for housings.
Black
(1)
White Neutral Transp. Red Green Yellow Blue Grey Brown
NE BA IN TA RO VE AM AZ GS MR
Color chart for rotor, housing and accessories
11 - Housing
Color: For colors other than standard: -See color chart below- CJ-color, ex., red: CJ-RO
14 - Potentiometers with assembled accessories
Assembled from terminal side
Color of shaft or thumbwheel
WT
Assembled from collector side WTI
Accessory Reference
See list of shafts and thumbwheels available
Non self-extinguishable.
Self-extinguishable according to standard UL 94
(-V0 in box 17 modifies only the accessory, please, note.)
-XXXXX
Example: 6030
-YY Example, white: BA
(leave blank)
-V0
For ordering spare accessories:
Accessory reference - color- flammability. XXXX-YY-V0
Ex. 6030-AZ-V0 is a blue self-extinguishable 6030 thumbwheel
12 - Rotor
Color: For colors other than standard: -See color chart below- RT-color; ex., blue: RT-AZ
* Self-extinguishable property, V0, for housing and rotor:
By default, carbon is non self-extinguishable, cermet is Self-extinguishable:
For carbon: self-extinguishable property can be added. V0 means housing
and rotor are V0. If only the housing needs to be V0, then CJ-V0.
If only rotor: RT-V0
CJ-V0, RT-V0
(blank)
V0
1 - Series
CA6
Others: following clock positions; at 3 hours: P3H
13 - Wiper
PI
Wiper position (Standard: 50% ± 15º) (leave blank)
Initial or CCW
PFFinal or CW
PXH, ex: P3H
Wiper torque (Standard: <2Ncm)
Low torque, < 1.5Ncm
(leave blank)
PGB
Extra features
9 10 11 12 13
Track
Snap in Housing Rotor Wiper
SNP PI
Assembled accessory
14
Assembly Ref # Color Flam.
WT -6030 -BA
Standard features
1 2 3 4 5 6 7 8
CA6 X V2,5 - 10K A 2020
Series Rotor Model
Packg . Ohm value
Taper Tol. Life
Bulk or Tape & Reel
7 - Tolerance
2020
±20%
3030
±30%
5030
+50%,-30%
1010
±10%
0505
±5%
2525
±25%
3 - Model and pitch
VS5H2,5 HSMD
VSMD
V5V2,5
VSMD WT…VESMD
VESMD WT…