Data Sheet

Specifications on this catalog are for reference only, as they are subject to change without notice.
53
www.acptechnologies.com
Potentiometers
with cut track
The cut track is an area with very high resistive value, resulting in an open circuit. It is widely used in lighting applications.
Mechanical life available with cut track needs to be confirmed case by case.
PCI = Cut at initial position, when the potentiometer is turned fully counter clockwise.
PCF = Cut at final position, when the potentiometer is turned fully clockwise.
Other positions are available on request.
PCI PCF
A
B
C
A
B
C
B
C
A
A
B
C
SNP
Also, there is an option of having shorter terminal tips.
By default, terminals are always straight, as shown on the “models” section. ACP can provide crimped terminals (with
snap in, “SNP” or “SNR”) to better hold the component to the PCB during the soldering operation.
Terminals
SNR
1
1
.8
R
1
.
5
1.5
0.9
Standard Terminal
Shorter terminal, TPXX
(under request)
Shorter terminal, for V12,5 TP30
4
.
0
3
.
0
X
.X
Possibilities
for insertion
of accessories
Accessories can be mounted on potentiometers through either the front side (WT) or the collector side (WTI).
For the specific angular position of shafts with planes, a drawing with the exact position is requested.
WT Front side WTI Collector side WT Front side WTI Collector side
RS14