Data Sheet

www.acptechnologies.com Specifications on this catalog are for reference only, as they are subject to change without notice.
60
CS14 HOW TO ORDER
EXAMPLE: CS14NV15-10KA2020 LV15 RSN LN3% WT-14015-NE-V0
Assembled accessory
16
Assembly Ref # Color Flam.
WT -14015 -NE -V0
Customized products: A drawing is requested when ordering a customized product. Series, rotor, model and total resistive value are indicated before the code that includes
all special specifications. Example: CS14NV15-10K CODE C00111.
Extra features
9 10 11 12 13
RSN
14 15
Track Detents
Snap in Housing Rotor Wiper Lin.
LN3%
Standard features
1 2 3 4 5 6 7 8
CS14 LV15N V15 - 10K A 2020
Series Rotor Model
Packg . Ohm value
Taper Tol. Life
Standard configuration:
Dimensions:
Protection:
Substrate:
Color:
Packaging:
Wiper position:
Terminals:
Marking:
CS14 Through-hole CS14 SMD
14mm
IP 54 (dust-proof)
On request: Self-extinguishable, to meet UL 94 V-0
Carbon technology Carbon technology, special for high temperature
Green housing + white rotor
Bulk
Brown housing + grey rotor
T & R
at 50% ±15º
Straight, without crimping. J-Lead
Resistive value marked on housing. Others on request.
4 - Packaging
T&R (Tape and 13” reel) (N.A.)
(2)
T&R
T&R (Tape and 15” reel)
Big Box: See page 9
(N.A.)
(2)
T&R15
Bulk (blank)
...
(1)
(blank)
...
(1)
(1) If blank, bulk packaging is implied. (2) N.A., Not Applicable: Tape and Reel packaging is only available for SMD terminals.
Trough-hole SMD models
8 - Operating Life (Turns)
Long life: LV + number of turns. ex: LV100 for 100.000 turns, LV150, LV1M
Standard (15.000 turns)
(others on request).
LV15
LVXXX: ex: LV100
1 - Series
CS14
3 - Model and pitch
H0 H2,5 H5 V12,5 V15 V15CFF VSMD VSMDCY
5 - Resistance value (see also page 10)
100 200 220 250 470 500 1K 2K
100Ω 200Ω 220Ω 250Ω 470Ω 500Ω 1KΩ 2KΩ 500KΩ 1MΩ 2MΩ 2M2Ω 4M7Ω 5MΩ...
500K 1M 2M 2M2 4M7 5M
- Special tapers have codes assigned:
6 - Resistance law / taper (see also page 10)
B
Lin - Linear A
Log - Logarithmic
CAntilog - Antilogarithmic
CODE YXXXXX
7 - Tolerance (see also page 10)
2020 3030 5030 1010 0505
±20% ±30% +50%,-30% ±10% ±5%
(1) black is not an option for housings.
Black
(1)
White Neutral Transp. Red Green Yellow Blue Grey Brown
NE BA IN TA RO VE AM AZ GS MR
Color chart for rotor, housing and accessories
16 - Potentiometers with assembled accessories
Assembled from terminal side
Color of shaft or thumbwheel
WT
Assembled from collector side WTI
Accessory Reference
See list of shafts and thumbwheels available
Non self-extinguishable. Self-extinguishable according to standard
UL 94 (-V0 in box 17 modifies only the accessory, please, note.)
-XXXXX ex: 14117
-YY ex: white: BA
(leave blank) -V0
For ordering spare accessories: Accessory reference - color- flammability.
Ex. 14117-AZ-V0 is a blue self-extinguishable 14117 thumbwheel XXXX-YY-V0
13 - Rotor
Rotors N, T, Z
RSN
All others rotors:
(leave blank)
Color: For colors other than standard: -See color chart below-
RT-color; ex., blue: RT-AZ
* Self extinguishable property V0 for housing and rotor
Not V0 (by default)
Housing and rotor V0
Only housing V0
Only rotor V0
CJ-V0
RT-V0
(leave blank)
V0
Others: following clock positions. Ex at 3 hours: P3H
14 - Wiper
PI
Wiper position (Standard: 50% ± 15º)
(leave blank)
Initial or CCW
PFFinal or CW
PXH, ex: P3H
Wiper torque
(leave blank)
(leave blank)
Standard for 15.000 turns: <2.5 Ncm, detents <3.5 Ncm
Special low torque for 15.000 turns <1.5 Ncm
PGB
Standard for >15.000 turns <1.5 Ncm
Stronger or softer feeling than above, available on request.
15 - Linearity
Independent linearity controlled and below x%. Ex: 3% LNx%, ex: LN3%
Standard, according to IEC 190
(leave blank)
LAx%, ex: LA2,5%
Absolute linearity controlled and below x%. Ex: 2,5%
2 - Rotors
B D* E F* G K M N* P T* X Z*
* Rotors available for versions with > 15.000 turns.
9 - Cut Track - Open circuit
CS14 already has an open circuit area at the base of the potentiometer (between 330º
and 0º). Additional cut tracks can be studied on request.
XDT, ex:16DT
10 - Detents (DT) (Available for up to 15.000 turns) Standard 16 detents
X number of detents: ex.16 detents
Special detents are available on request: If you need to assign a voltage value to each detent, please inquire.
11 - Terminals (THT)
SNAP IN P
SNR
SNAP IN R
SH
Steel Terminals
SNP
TPXX, ex: TP30
Shorter tip of terminal, TPXX, where XX is tip length
(under request)
12 - Housing
Color: For colors other than standard: -See color chart below-
CJ-color, ex., red: CJ-RO