Data Sheet

SNP SNR

DT1

DT2

DT3

DT14

DT13

260°

DT1

DT2

DT3

DT38

DT37

260°

Our patented design with two wipers has improved the performance of these potentiometers, giving them more stable electrical parameters,

improved reliability and Contact Resistance Variation (CRV) and narrower tolerances for detent positioning.

For potentiometers with detents, mechanical life is also 1.000 cycles, if no additional cycles are mentioned. Up to 10.000 cycles are

available. Please, indicate the number of cycles needed with LV (number of cycles), for example: LV10, for 10.000 cycles.

Also, there is an option of having shorter terminal tips:

1.5

0.9

Potentiometers

with detents

Examples of some potentiometers with detents:

14DT

By default, terminals are always straight, as shown on the “models” section. ACP can provide crimped terminals (with

snap in, “SNP” or “SNR”) to better hold the component to the PCB during the soldering operation.

Terminals

Standard Terminal

Shorter terminal, TPXX

(under request)

Shorter terminal, for V12,5

Possibilities

for insertion

of accessories

Accessories can be mounted on potentiometers through either the front side (WT) or the collector side (WTI). For the

specific angular position of shafts with planes, a drawing with the exact position is requested.

WT Front side WTI Collector side WT Front side WTI Collector side

1 (Initial, final or central), 3, 4, 5, 6,

7, 8, 9, 10, 13, 14, 17, 22, 27, 38.

Maximum number of detents for feeling only

Number of standard detents (evenly distributed) already available.

Other configurations are available under request.

Maximum number of detents when the voltage value in each detent is controlled and non-overlapping.

www.acptechnologies.com Specifications on this catalog are for reference only, as they are subject to change without notice.

38DT