Data Sheet

14mm Rotary Sensor with up to 1.000.000 cycles of mechanical
life on its standard configuration, making it particularly appropriate
for control applications.
RS14 has plastic housing and Ingress Protection rating type IP 54
(high level of protection against dust and also against water splashing),
according to IEC 60529. Plastic materials can be self-extinguishable
according to UL 94 V-0 under request.
Through-hole and SMD configurations are available. Terminals and
collector are manufactured in tinned brass, although versions with
steel terminals are also available under request. Terminals for
through-hole models can be provided straight or crimped, which
helps hold the component to the PCB during soldering.
Standard taper is linear, with linearity of ±3%. ACP can study other
special tapers (even cut tracks, step curves with areas of constant
value, etc), as well as more strict linearity.
Thumbwheels and shafts can be provided either separately or
already inserted in the sensor. Our RS14 can be manufactured in
a wide range of possibilities regarding: resistance value, tolerance,
tapers, pitch, positioning of the wiper, housing and rotor color.
Applications
- Household appliances: temperature control, position sensor.
- Automotive: position adjustment and sensing.
- Industrial controls.
RS14
Specifications on this catalog are for reference only, as they are subject to change without notice.
49
www.acptechnologies.com
RS14