Use and Care Manual

Before operating this plate compactor read and observe all warnings, cautions, and instructions both on the labels
and in this owner’s manual.
NOTE: The following safety information is not meant to cover all possible conditions and situations that may occur.
This safety alert symbol is used to identify safety information about hazards that can result in personal injury.
A signal word (DANGER, WARNING, or CAUTION) is used with the alert symbol to indicate the likeli-
hood and the potential severity of injury. In addition, a hazard symbol may be used to represent the type
of hazard.
DANGER indicates a hazard, which, if not avoided, will result in death or serious injury.
WARNING indicates a hazard, which, if not avoided, could result in death or serious injury.
CAUTION indicates a hazard, which, if not avoided, might result in minor or moderate injury.
CAUTION when used without the alert symbol, indicates a situation that could result in damage to the engine or
plate compactor.
Thank you for purchasing a WEN Plate Compactor. This manual provides information regarding the safe opera-
tion and maintenance of this product. Every effort has been made to ensure the accuracy of the information in this
manual. WEN reserves the right to change this product, manual and specifications at any time without notice.
Please keep this manual available to all users during the entire life of the plate compactor.
This manual contains special messages to bring attention to potential safety concerns as well as helpful
operating and servicing information. Please read all the information carefully to avoid personal injury
and machine damage.
QUESTIONS? PROBLEMS?
In order to answer questions and solve problems in the most efficient and speedy manner, contact Customer
Service at (800) 232-1195, M-F 8-5 CST or email techsupport@wenproducts.com.
NOTICE REGARDING EMISSIONS
Engines certified to comply with U.S. EPA emission regulations for SORE (Small Off Road Equipment) can be
operated on regular unleaded gasoline and may include the following emission control systems: (EM) Engine
Modifications and (TWC) Three-Way Catalyst (if so equipped).
4
INTRODUCTION
SAFETY INFORMATION