Use and Care Manual
6
SAFETY INFORMATION
11) Only use the plate compactor for its intended purposes.
12) Operate only on dry, level surfaces.
13) Turn the engine switch to “OFF” position when the engine is not running.
14) Do not operate or service this machine before reading the entire manual.
15) Never operate this equipment without proper protective clothing, shatterproof ANSI-approved glasses, steel-
toed boots, and other protective job site devices.
16) Never operate this equipment while under the influence of drugs or alcohol or while feeling fatigued or ill.
17) Always check the machine for loosened threads or bolts before starting.
18) Always wear proper respiratory, hearing and eye protection during operation.
19) Manufacturer does not assume responsibility for any accident due to equipment modifications and will also
void the warranty.
20) Never use accessories or attachments that are not recommended by WEN for this model of plate compactor.
21) DO NOT add fuel to the plate compactor if it is placed on top of a plastic surface such as a pickup truck bed
with a plastic liner. This creates the possibility of ignition or explosion due to static electricity buildup.
22) Always refuel in well-ventilated areas. Never operate near open flames, sparks or any other item that could
cause the fumes of the gasoline to ignite.
23) Before performing compacting work near buildings or above pipelines, check the effect of the vibrations on
the buildings and pipelines. If necessary, immediately stop the compacting work.
CAUTION: Misuse of this unit can damage it or shorten its life.
WARNING: This unit produces heat when running. Temperatures near exhaust can exceed 150
0
F
(65
0
C).
SAVE THESE INSTRUCTIONS – This manual contains important instructions for the WEN Plate Compactor
that should be followed during installation and maintenance. If items are damaged, have them repaired or re-
placed as necessary. Do not operate if you notice signs of damage such as broken or cracked insulation.
NOTE: We suggest running your engine at least once a month in order to maximize the lifespan of the plate
compactor.