Product Manual

UNPACKING & ASSEMBLY
ASSEMBLY
To attach the carrying handle:
1. Remove the 2 bolts and 2 washers from the handle.
2. Position the handle over the threaded holes in the fuel tank.
3. Fasten the handle with the bolts and washers (Fig. 1 - 1).
Tighten the bolts using a Phillips-head screwdriver (not in-
cluded).
UNPACKING
Place the packaging on a sturdy, flat surface. Carefully unpack the generator and all accessories from the
box, making sure it is completely empty before discarding the package. Your generator comes with the
items listed below. Please check to see that all of the following items are included with your generator.
• Carrying Handle with 2 Bolts and 2 Washers
• Spark Plug Wrench
• Measuring Cup
If any part is damaged or missing, please contact our customer service at [phone], M-F 8-5 CST or
email us at [e-mail].
8
Fig. 1
1
HIGH ALTITUDE OPERATION ABOVE 3000 FEET
The fuel system on this generator may be affected by operation at high altitudes. Proper operation can be
ensured by installing an altitude kit. The kit can be ordered from wenproducts.com by searching the part
number 56105-HA. Use jet nozzle #68 for altitudes between 3000 to 6000 feet; use jet nozzle #65 for alti-
tudes between 6000 to 8000 feet. At elevations above 8000 feet, the engine may experience a decrease in
performance, even with the proper altitude kit.
Operating this generator without said kit may increase the engine’s emissions and decrease both fuel
economy and performance. The kit should be installed by a qualified mechanic. Refer to the instructions
included with your altitude kit for more information about installation.
CAUTION: Be sure to UNINSTALL the high altitude kit when operating at altitudes below 3000 feet. Engines
with the high-altitude kit installed operated at lower altitudes could cause severe engine damage and affect
emissions compliance.
WARNING: To prevent serious injury from fire, follow the kit installation procedures in a well-ven-
tilated area away from ignition sources. If the engine is hot from use, shut the engine off and wait for it
to cool before proceeding. Do not smoke near the generator. Warranty will be void if adjustments are not
made for high altitude use.