Product Manual

SPECIFICATIONS

INTRODUCTION

Thanks for purchasing the WEN Benchtop Jointer. We know you are excited to put your tool to work, but ﬁrst, please

take a moment to read through the manual. Safe operation of this tool requires that you read and understand this

operator’s manual and all the labels afﬁxed to the tool. This manual provides information regarding potential safety

concerns, as well as helpful assembly and operating instructions for your tool.

NOTE: The following safety information is not meant to cover all possible conditions and situations that may occur.

WEN reserves the right to change this product and speciﬁcations at any time without prior notice.

At WEN, we are continuously improving our products. If you ﬁnd that your tool does not exactly match this manual,

please visit wenproducts.com for the most up-to-date manual or contact our customer service at 1-800-232-1195.

Keep this manual available to all users during the entire life of the tool and review it frequently to maximize

safety for both yourself and others.

Indicates danger, warning, or caution. The safety symbols and the explanations with them deserve your

careful attention and understanding. Always follow the safety precautions to reduce the risk of ﬁre, electric shock

or personal injury. However, please note that these instructions and warnings are not substitutes for proper ac-

cident prevention measures.

Model Number JT630H JT833H

Motor 120V, 60 Hz, 10A 120V, 60 Hz, 10A

Cutterhead Rotation Speed 11,000 RPM 11,000 RPM

Max Cutting Width 6 Inches 8 Inches

Max Cutting Depth 1/8 Inch 1/8 Inch*

Recommended Cutting Depth 1/32 Inch 1/32 Inch

Number of Blades 12 16

Table Size 30 in. x 6-3/16 in. 33 in. x 8 in. (extensions up to 51 in.)

Fence Size 4-1/4 in. x 19-3/4 in. 4-1/4 in. x 19-3/4 in.

Dust Port Diameter 2-1/2 Inches 2-1/2, 4 Inches

Fence Bevel 90-135° 90-135°

Product Dimensions 30 in. x 17.5 in. x 12.5 in. 34.5 in. x 18.75 in. x 12.5 in.

Weight 36.8 lbs 55.1 lbs

*When jointing boards over 6 inches, reduce maximum cutting depth by 1/32 inch per inch