Product Manual B

SELF-RETRACTING LIFELINES
USER INSTRUCTIONS
Page 11
ENGLISH
d. Rated capacity
See appropriate appendix for SRL capacity. DO NOT EXCEED
THIS WEIGHT.
e. Environmental hazards
This equipment is to be used only under the direct supervision
of a competent person who is able to identify hazards that must
be avoided, including electricity, chemicals, machinery or other
moving objects, sharp edges, damaged anchorages or structures,
or any other workplace element that could damage this equipment
or prevent it from operating as intended.
f. Components / Subsystems
Before  rst use, a quali ed person should inspect all components
and ensure subsystems are compatible and will perform correctly
when combined into a complete personal fall protection system.
Consult the information in these instructions, and if any additional
information is needed, contact Werner Co. directly.
IV. Labels/Identi cation/Inspection Records
a. All products must be inspected by the user thoroughly before each
use. Additional inspections by a competent person other than the
user should be conducted at least annually. The interval should be
shortened any time the product is used in a harsh environment or
is exposed to conditions such as chemicals, abrasion, heat or any
other factor that could affect the strength of any of the materials or
components.
b. The product labels provide an inspection grid to record these
inspections by a competent person. Use a permanent marker to
record those dates.
c. This manual should always accompany the product or be on  le with
the employer for access when needed. Record the identi cation
details for the SRL and record the inspections in the inspection
record on page 12. It is important to maintain this log with current,
complete information and have it available as needed.