Product Manual B

Page 8
ENGLISH
e. Maintenance
1. Periodically clean the housing exterior and lifeline with water
and a mild detergent. Rinse and towel and air dry.
2. Store in a clean, dry environment when not in use.
3. No alteration or modi cation of the device is permitted. Do
not attempt to open the device. It contains no user-serviceable
parts. If opened or modi ed the device should be removed
from service and returned to Werner Co. for inspection.
f. Repair Service
Any service or repair, such as lifeline replacement, must be
completed by an authorized service center. Authorization and return
number must be issued by Werner Co. Please contact Werner Co.
directly for more information about service and repairs.
g. Connecting Single Leg Models
1. Connect SRL to anchorage
i. Connect body of SRL to the anchorage or anchorage
connector using the carabiner supplied or other
compatible hardware. Do not use a connector that will not
close completely when attached to anchor or anchorage
connector.
ii. To connect the carabiner to the connection point, rotate
the gate clockwise and push to the center of the carabiner.
When positioned around a connection point, release the
gate to close and lock.
2. Connect SRL to harness
i. Connect the snap hook of the
SRL only to the dorsal (back)
D-ring on the user’s harness.
3. See appendices if the speci c unit is
allowed for use in other orientations
h. Connecting Twin leg Models
1. Connect SRL to harness
i. See appendices for applicable
models.