Use and Care Manual

English - 4
Reference
Part
Function
1
Power Line
Used to power on and provide power.
2
Juicer Body
The main parts of the machine,
including the motor and other parts.
3
Power Switch
Controls the machine’s operation.
4
Button
Used to lock the juicing body and
prevent loosening from the machine
during operation. To remove the juicing
body from the machine body, press and
hold the button.
5
Juice Cup
Catch and collect juice.
6
Pulp Cup
Catch and collect pulp.
7
Pusher
Gently pushes the ingredients so
that they are in full contact with the
auger for juicing efficiency.
8
Hopper
Area where juice ingredients are
placed.
9
Drum & chute
Main parts of the juicer
components.
10
Auger
Grinds and squeezes the
ingredients together through the
strainer to make juice.
11
Fine Strainer
Filters the juice.
12
Joint
Joint between the juicing body and
the cover.
13
Cover
Connects juicing components.
USING YOUR COLD PRESS JUICER
Please check all packaging material carefully before discarding.
Many accessory parts are contained within the packaging material.
Wash the juicer components thoroughly before using.
Refer to the maintenance section in this manual.
1
Connect the juicing body to the machine body:
1. Align the central position of the drum/chute with
the juicer body.
2. Then rotate counterclockwise, and when you hear
a "click" sound, the drum/chute is fully connected.
2
Align the auger with the hole in the machine body
and push it gently to attach.