Use and Care Manual

English - 5
3
Align the larger end of the fine strainer in from the
end of the auger, and line up the three fasteners of
the fine strainer to the three fastening slots in the
drum/chute.
4
Line up the three fastening slots on the drum/chute
with the three fastening slots on the juicing body,
push into place, and then rotate counterclockwise to
tighten.
5
Place the juice cup next to the machine body so that
it aligns with the juice mouth to catch juice as it is
extracted.
6
Put the pulp cup under the pulp outlet of the juicing
body, close to the juice cup to catch pulp as it is
extracted.
7
Place the hopper on onto the chute.
The hopper makes feeding ingredients more
convenient such as small items like grapes,
strawberries, etc.
8
Plug the machine into the outlet. (Make sure the
switch is off before plugging in.)
9
Wash the fruits and vegetables, cut them into pieces
that can be put into the feed chute Remove seeds
and thick or hard peels.
Note: Fruits such as sugar cane, guava, and mango
cannot be juiced with this machine.
10
Turn the switch to “ON” to begin juicing.
Do not touch the power switch or plug with wet
hands to avoid electric shock.