Use and Care Manual

English - 6

Using the Pusher feed the ingredients through the

chute. Only use gentle pressure when pushing

ingredients through chute. Do not force. (Don't put

your fingers or other objects into the feed

chute!) If the pulp cup or juice cup is full stop the

machine and empty and then begin again.

When the ingredients are processed and there is no

more juice flowing out of the juicing nozzle of the

juicer, turn the power switch to “OFF” and

disconnect the power.

MAINTENANCE OF YOUR COLD PRESS JUICER

1. Before washing this product, be sure to turn off the switch and disconnect the

power supply.

2. Wash this product after right after use to prevent buildup on parts.

3. The juicer body must not be washed with water. Wipe with a damp cotton cloth.

4. Please make sure the product is clean and dry before storage.

Please refer to the following steps to disassemble the juicer and then clean:

Take the pusher and the hopper first.

Hold the button near the juicing body

down, and at the same time rotate the

juicing body clockwise to take the

drum/chute off. If the button is not

pressed, the drum/chute cannot be taken

off.

Next remove the fine strainer and the

auger off in proper order as shown.

Removable parts can be cleaned with

clear water.

This appliance has no user serviceable parts.