User guide

030-300432 Rev. A 107 February 2005
User Guide
13.6.3.1 Enabling DSLATM PORT – Disabling ETHERNET PORT 1
(Models 328W10 and 328W11 only)
NOTE: When using the optional UPLINK/E1 port, Ethernet LAN connection is limited to E2, E3, and E4.
The UPLINK feature is optional. If UPLINK is not enabled, the Router will use DSL and wireless only.
To configure the Router so that it uses the DSL port, select DSLATM PORT from the WAN PORT drop-down
arrow. By selecting DSLATM PORT, you will enable the Router’s DSL transceiver. This will disable the WAN
Ethernet port and allow the WAN interface to use the DSL port.
NOTE: All of the Router’s menu options are displayed if the Router is configured for DSLATM PORT.