User guide

030-300432 Rev. A 110 February 2005
User Guide
13.6.3.2 Disabling DSLATM PORT – Enabling ETHERNET PORT 1
(Models 328W10 and 328W11 only)
To configure the Router so that it uses the WAN Ethernet Port, select ETHERNET PORT 1 from the WAN PORT
drop-down arrow. By selecting ETHERNET PORT 1, you will disable the Router’s DSL transceiver. This will
disable the DSL Port and allow the WAN interface to use the WAN Ethernet Port.
NOTE: If ETHERNET PORT 1 is configured, the Router’s menu options may or may not be displayed. The sections
explained throughout this document will indicate when a menu item is unavailable. The UPLINK feature is optional,
and if UPLINK is not enabled in the .ini file, the Router will use DSL and Wireless only.
NOTE: If you experience any problems, please reset the Router via the external hardware reset button or via the
procedure defined in section 15.1(Backup/Restore) from the Maintenance menu. Click the restore button adjacent
to ‘Factory defaults become Current configuration’.