User guide

030-300432 Rev. A 121 February 2005
User Guide
If you selected VLAN Bridge under VC 1- Bridge Settings, the following screen will be displayed. Enter the
appropriate values in the fields and click on set VC.
VC 1 - Bridge Settings (VLAN Bridge)
Mode The Mode you have selected to use with Bridge protocol.
VLAN is used to assign VLAN tags to individual data ports on the modem.
VLAN ID Assigns a VLAN ID to the port.
VLAN Priority This will set the VLAN priority for the port.
VLAN on WAN Factory Default = DISABLE
Selecting Enable allows VLAN tagging to occur according to the data port’s
configuration.