User guide

030-300432 Rev. A 123 February 2005
User Guide
13.6.7 Configuring VC Protocol Settings for ETHERNET PORT 1 (Models
328W10 and 328W11 only)
To configure the Router’s VC settings via the Ethernet UPLINK/E1 port, select ETHERNET PORT 1 at the WAN
Port drop-down arrow.
By selecting ETHERNET PORT 1, you will disable the Router’s DSL transceiver. This
will enable the WAN Ethernet port and allow the WAN interface to use the UPLINK/E1 Port.
If you select ETHERNET PORT 1, the following pop-up will be displayed. Click on OK.