User guide

030-300432 Rev. A 129 February 2005
User Guide
13.6.8 QOS
The following settings will be displayed if you select Advanced WAN > QOS from the Configuration menu. If you
change any settings in this screen, click on save. If you click on reset, this screen will refresh and display your
previously saved QOS configuration.
IMPORTANT: If you are using Model 328W10 or 328W11 and the Router is configured for ETHERNET PORT 1,
the QOS option will not be displayed in the Advanced WAN drop-down menu. You must configure the Router for
DSLATM PORT to access QOS. Refer to section 13.6.3.1 for details on enabling and disabling DSLATM PORT
and ETHERNET PORT 1.
NOTE: The QOS feature helps ensure data integrity in high-speed transmissions. QOS provides the capability to
partition network traffic into multiple priority levels or classes of service. After packet classification, other QOS
features can be utilized to assign the appropriate traffic handling policies including congestion management,
bandwidth allocation, and delay bounds for each traffic class.
QOS Enable Factory Default = DISABLED
If this box is checked, Quality of Service (QOS) will be Enabled.
Turbo TCP Enable Factory Default = DISABLED
If this box is checked, Turbo TCP will be Enabled.
QOS Configuration
QOS Filter Enable Factory Default = DISABLED
If this box is checked, this will Enable the QOS filter.