User guide

030-300432 Rev. A 146 February 2005
User Guide
15.3 Administrative Password
The following settings will be displayed if you select Administrative Password from the Maintenance menu.
After you enter your data into the appropriate settings, click on change.
NOTE: If the Router is password protected and you are not an authorized user, you will not be able to change the
values. (The Router cannot be configured unless the user is logged in.) Contact your network administrator for
further instructions.
Enter Administrative Name
NOTE: This changes the Systems Administrator
password not the PPP password.
Type the name of your network administrative.
Enter Administrative Password Type your network administrator’s password.
Verify Administrative Password Re-type your network administrator’s password.